How To Fix The ‘Page Fault in Non-Paged Area’ BSOD In Windows 10 or 11 – Quick Fix

How To Fix The ‘Page Fault in Non-Paged Area’ BSOD In Windows 10 or 11 – Quick Fix

Photo of author
Written By Eric Sandler

The Page Fault in Non-Paged Area Blue Screen of Death (BSOD) is a frustrating error that often results in system crashes on Windows 10 and 11. This error occurs when Windows attempts to access memory that should not be paged out to disk (non-paged memory) and encounters an issue.

The causes can vary from faulty hardware to driver issues or even corrupted system files. Fortunately, there are several methods to resolve this error and get your system running smoothly again. Here’s a detailed guide on how to fix the Page Fault in Non-Paged Area error.

Hopefully one of these will provide you with a quick fix.

Common Causes of the Page Fault in Non-Paged Area BSOD

Several factors can cause this BSOD, including:

  • Corrupt or faulty drivers.
  • Corrupted system files.
  • Faulty RAM (memory).
  • Issues with the paging file (virtual memory).
  • Antivirus software conflicts.

Now let’s go through different methods to resolve the issue.

Method 1: Restart in Safe Mode

If you can’t boot into Windows normally, you should try starting the system in Safe Mode. This loads only the essential drivers and services, allowing you to troubleshoot the issue.

Step 1: Enter Safe Mode

  1. Restart your computer and interrupt the boot process three times (press the power button as soon as the Windows logo appears) to trigger the Automatic Repair screen.
  2. Select Advanced Options > Troubleshoot > Advanced options > Startup Settings.
  3. Click Restart, then press 4 or F4 to boot into Safe Mode.

Now that you are in Safe Mode, you can proceed to troubleshoot the issue.

Method 2: Check for Faulty Drivers

Faulty or outdated drivers are one of the most common causes of the Page Fault in Non-Paged Area error. You should ensure that all your drivers are up-to-date or remove any recently installed drivers that could be causing the problem.

Step 1: Update or Rollback Drivers

  1. Press Windows + X and select Device Manager.
  2. Look for any devices with a yellow triangle or red exclamation mark—these indicate driver issues.
  3. Right-click the problematic device and select Update driver.
  4. If the issue started after a recent driver update, right-click the device, select Properties, go to the Driver tab, and choose Rollback Driver.

Step 2: Uninstall Problematic Drivers

If updating or rolling back the driver doesn’t work:

  1. In Device Manager, right-click the problematic driver and choose Uninstall.
  2. Restart your PC to see if the BSOD error persists.

Method 3: Run Windows Memory Diagnostic

Faulty RAM (memory) can cause the Page Fault in Non-Paged Area error. Running the Windows Memory Diagnostic tool can help identify and resolve memory-related issues.

Step 1: Run Windows Memory Diagnostic

  1. Press Windows + R to open the Run dialog, then type mdsched.exe and press Enter.
  2. Choose Restart now and check for problems.
  3. Your PC will restart, and the Windows Memory Diagnostic tool will check for memory issues.
  4. After the scan completes, the results will be displayed after you log in. If there are memory issues, you may need to replace your RAM.

Method 4: Check for Corrupted System Files

Corrupted system files can cause various errors, including the Page Fault in Non-Paged Area BSOD. Running the System File Checker (SFC) and DISM tools can repair any corrupted files.

Step 1: Run System File Checker (SFC)

  1. Press Windows + S, type cmd, then right-click Command Prompt and select Run as administrator.
  2. In the Command Prompt window, type the following command and press Enter:
   sfc /scannow
  1. Wait for the scan to complete. If SFC finds any corrupted files, it will attempt to repair them automatically.

Step 2: Run DISM Tool

If SFC doesn’t resolve the issue, you can run the DISM tool:

  1. In the same Command Prompt window, type the following commands one by one and press Enter after each:
   DISM /Online /Cleanup-Image /CheckHealth
   DISM /Online /Cleanup-Image /ScanHealth
   DISM /Online /Cleanup-Image /RestoreHealth
  1. After the process is complete, restart your PC and see if the BSOD error is resolved.

Method 5: Disable Automatic Paging File Management

The Page Fault in Non-Paged Area error can sometimes be caused by issues with virtual memory (paging file). Disabling automatic paging file management and setting a custom size may help.

Step 1: Adjust Paging File Settings

  1. Press Windows + S and type performance, then select Adjust the appearance and performance of Windows.
  2. In the Performance Options window, go to the Advanced tab and click Change under Virtual memory.
  3. Uncheck Automatically manage paging file size for all drives.
  4. Select your system drive (usually C:), choose Custom size, and set both Initial size and Maximum size to values recommended at the bottom of the window.
  5. Click Set, then OK, and restart your computer.

Method 6: Uninstall Third-Party Antivirus Software

Sometimes, third-party antivirus software can interfere with system processes and cause the Page Fault in Non-Paged Area error. Temporarily uninstalling the software can help you determine if it’s the cause of the BSOD.

Step 1: Uninstall Antivirus Software

  1. Press Windows + I to open Settings.
  2. Go to Apps > Apps & features.
  3. Find your third-party antivirus software, click on it, and select Uninstall.
  4. Restart your PC and check if the error is resolved.

If the error is fixed after uninstalling the antivirus, consider switching to a different antivirus or using Windows Defender, which is built into Windows and often doesn’t cause such issues.

Method 7: Perform a System Restore

If the Page Fault in Non-Paged Area error started happening after a recent change, such as installing new software or drivers, you can try using System Restore to revert your PC to an earlier state when it was working fine.

Step 1: Access System Restore

  1. Press Windows + R, type rstrui, and press Enter.
  2. In the System Restore window, choose a restore point from a date before the error started occurring.
  3. Follow the on-screen instructions to restore your system to an earlier state.

Method 8: Reset Your PC

If none of the above methods work, you can try resetting your PC. This will reinstall Windows, but you can choose whether to keep your personal files or remove everything.

Step 1: Reset Your PC

  1. Press Windows + I to open Settings.
  2. Go to Update & Security > Recovery.
  3. Under Reset this PC, click Get started.
  4. Choose either Keep my files (which retains your personal data) or Remove everything (a full reset), and follow the instructions to reset your PC.

Conclusion

The Page Fault in Non-Paged Area BSOD in Windows 10 or 11 can be caused by a variety of issues, but following the steps in this guide will help you resolve the error. Start with basic fixes like checking drivers and running memory diagnostics, and if needed, move on to more advanced steps like system file repairs or resetting your PC. By systematically troubleshooting the problem, you should be able to get your system back up and running without the blue screen interruptions.

Eric Sandler

Leave a Comment