To enable TPM 2.0 on your PC for upgrading to Windows 11, you typically need to access your BIOS or UEFI settings.

Here’s a step-by-step guide to help you:

Step 1: Check if TPM 2.0 is enabled on your PC

1. Press Windows + R to open the Run dialog box.
2. Type tpm.msc and press Enter.
3. In the TPM Management window, check the Status. If it says “The TPM is ready for use” and shows Specification Version 2.0, TPM 2.0 is already enabled.

If TPM 2.0 is not enabled or you don’t see it, proceed to the next step.

Step 2: Access BIOS/UEFI

1. Restart your PC.
2. During startup, press the BIOS/UEFI key (commonly Delete, F2, Esc, or F10). The exact key depends on your motherboard, and it should appear on the screen when your PC starts up.
3. You will enter the BIOS/UEFI settings.

Step 3: Enable TPM 2.0 in BIOS/UEFI

1. In the BIOS/UEFI menu, navigate to the Security or Advanced tab. The exact location depends on your motherboard.
2. Look for TPM, Intel PTT, or AMD fTPM settings, depending on your processor:

• For Intel processors, enable PTT (Platform Trust Technology).
• For AMD processors, enable fTPM (Firmware TPM).

1. Save the settings and exit BIOS/UEFI (usually by pressing F10).

Step 4: Verify TPM 2.0 is enabled

After restarting your computer, follow Step 1 again to verify TPM 2.0 is now enabled.

Step 5: Check Windows 11 Compatibility

Now that TPM 2.0 is enabled, you can use Microsoft’s PC Health Check tool to verify if your PC meets the Windows 11 requirements.

If TPM 2.0 is enabled and your system meets other requirements (like Secure Boot and appropriate hardware), you can proceed with upgrading to Windows 11.

How to Enable TPM

If you need to enable TPM (Trusted Platform Module), this can be done through your computer’s UEFI BIOS (firmware). The exact steps may vary depending on your device, but here’s a general guide to help you:

1. Access UEFI BIOS via Windows Settings:
   • Go to Settings > Update & Security > Recovery.
   • Under Advanced startup, click Restart now.
   • On the next screen, select Troubleshoot > Advanced options > UEFI Firmware Settings > Restart.
2. Locate TPM Settings in UEFI BIOS: Once your computer restarts and enters the UEFI BIOS, navigate to the appropriate menu. TPM settings are typically found under tabs labeled Advanced, Security, or Trusted Computing.
3. Enable TPM:
   • Look for options related to TPM, which may be labeled as one of the following:
     • Security Device
     • Security Device Support
     • TPM State
     • AMD fTPM switch
     • AMD PSP fTPM
     • Intel PTT (Platform Trust Technology)
   • Once you find the setting, change the status to Enabled.
4. Save and Exit:
   • After enabling TPM, save the changes and exit the BIOS. Your computer will restart, and TPM will be active.

By following these steps, you’ll be able to enable TPM, which is required for upgrading to Windows 11 and for improved security features.

• Author
• Recent Posts

Eric Sandler

Chief Writer at WiFi Planet

Eric Sandler is a veteran US tech writer with over 25 years of experience covering the latest advancements in the world of technology. From groundbreaking innovations to in-depth reviews, Eric has built a reputation for delivering insightful, reliable content. His work spans across a variety of tech topics, including smartphones, gadgets, AI, and more, making him a trusted voice in the industry.

Latest posts by Eric Sandler (see all)

• AMD Prepares to Refresh Professional Graphics Lineup with RDNA 4 Radeon Pro Series - April 21, 2025
• This Viral Aluminum Foil Wi-Fi Hack Is Blowing People’s Minds – But Does It Actually Work? - April 20, 2025
• Live in an Older Home? Here’s Why Your Wi-Fi Is Terrible—and How to Fix It Fast - April 17, 2025